Digital Multimeter

Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. Fluke 101+ Kit Palm Size Digital Multimeter along with Calibration Certificate.

Features :

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design
• Automatic shutdown
• Battery is easy to replace

Fluke 101 Includes:

• Fluke 101 Basic Digital Multimeter
• Tl75 Hard Point Test Lead Set
• Two AAA Batteries (Installed)

Fluke 101 Kit Includes:

• Fluke 101 Basic Digital Multimeter
• Tl75 Hard Point Test Lead Set
• Two AAA Batteries (Installed)
• Smart Strap

Fluke 101 / i400E Clamp Bundle Includes:

• Fluke 101 Basic Digital Multimeter
• Fluke i400E AC Current Clamp
• Tl75 Hard Point Test Lead Set

Features :

• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A and current
• Data hold

Electromagnetic Compatibility : Applies to use the Korea only. Class A Equipment (Industrial Broadcasting and Communication Equipment)

True RMS Multimeter include:

• 80BK Temperature Probe (179 only)
• Installed 9V battery
• Test leads
• Users manual

The Fluke 17B+ digital multimeter does all that and more.  Common basic electrical measurements plus temperature, frequency and duty cycle.  Easy to use with one hand, even with gloves on, the Fluke 17B+ offers everything you need.

Features :

• 600 V Cat III safety rating
• 50% bigger display with bright white backlight
• Over-voltage indicator
• Frequency and temperature measurement
• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A current
• Diode test, data hold

Accuracy Specifications : Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, relative humidity at 0 % to 75 %. Accuracy specifications take the form of : ± (% of Reading + Number of Least Significant Digits).

Battery life : 500 hours minimum (50 hours in LED Test mode without load. The hours with load depends on the type of LED under test.)

Operating humidity

• Non-condensing (<10°C)
  
  • ≤90% RH at 10 °C to 30 °C;
  • ≤75% RH at 30 °C to 40 °C
• 40 MΩ range
  
  • ≤80% RH at 10 °C to 30 °C;
  • ≤70% RH at 30 °C to 40 °C

Fluke TPAK ToolPak™ Magnetic Meter Hanger Kit includes:

• 9 inch hook and loop strap
• Universal hanger clip
• Hook hanger for non magnetic surfaces
• Strong magnet

Application

• RISH Max-10 digital multimeters are suited for universal, general applications in the electrical and electronics fields, as well as in radio and television service, training and education.
• They are of especially flat design, and thus fit into any bag. The protective cover, which is provided as standard equipment, can be opened at an angle for convenient reading from the workbench, and provides for easy transport.

Features :

• Hold - By pressing the HOLD/ON key, the currently displayed measurement value can be held and “HOLD” is simultaneously displayed.
• Relative measurement (REL) - By pressing the REL key, the zero correction is made and Relative Value is measured. All functions can measure Relative Value except Hz/Duty, Diode, Continuity and °C functions.
• Automatic/manual measuring range selection - The measurement functions are chosen with the rotary selector switch. The measuring range is automatically adjusted to the measurement value. The measuring range can also be manually selected with the AUTO/MAN button. Note: For Temperature (°C), Frequency (Hz), Duty cycle (%) and Capacitance (F) measuring range is AUTO. No Manual range selection is possible.
• Temperature Measurement - Rish Max - 10 allows you to measure temperature with “K” type Thermocouple (NiCr - Ni) sensor in the range from 0 °C to +1300 °C.
• Diode and continuity testing - This provides for the testing of the polarity of diodes, as well as inspection for short-circuits and circuit interruptions. In addition to the display, resistances of less than 100 Ohm  (approx.) are indicated with an acoustic signal.
• Overload warning - An acoustic signal occurs when measuring AC voltage>750V, DC Voltage>1000V, AC/DC mA current>400.0mA, AC/DC current>10.00A.
• Energy saving circuit - The instrument is switched off automatically, if none of the operating elements have been activated for about 15 minutes.
• Protective cover for rough operating conditions - A protective cover of ABS with a built-in stand protects the instrument against jolts and falls. It also secures the test probe for one-hand operation, and allows for winding of the measurement cable which provides protection during transport.

Theft protection : Company name and name of the user can be entered into the field next to the display with an indelible etching needle for identification of the owner.

• Direct and alternating voltages from 100 µV - 1000V
• Direct and alternating currents from 10 µA - 10.00A
• Resistances from 100mOhm - 40.00MOhm with zero correction
• Capacitance from 1pF- 200.00µF with zero correction.
• Frequencies from 10.00Hz - 500.0kHz
• Diode measurement and continuity testing
• Hold measurement
• Relative measurement
• Duty cycle (%) measurement
• Temperature measurement with K type Thermocouple

Reference Conditions

• Ambient temperature - + 23 C + 2 K
• Relative humidity - 45 % ... 55 %
• Frequency of meas. quantity - Sine 50 Hz
• Operating voltage - 3V + 0.1V

Power Supply

• Battery 2 numbers of 1.5V mignon cell Zinc- carbon cell as per IEC R6 Alkaline manganese dry cell as per IEC LR 6
• Service life
• Zinc-carbon cell: approx. 300 hours
• Alkaline manganese dry cell: appox. 600 hrs
• Battery test - Automatic display of „ ” symbol when battery voltage falls value : approx. 2.4 V

Fuse

• Fuse for ranges up to 400 mA - 1.6 A / 600V; 6.3 mm x 32 mm
• Fuse for 10 A range - 16 A / 600V; 6.3 mm x 32 mm

Ambient Conditions

• Operating temperature range - -10 C ... + 50 C
• Storage temperature range - - 25 C ... + 70 C (without batteries)
• Relative humidity - 45 ... 75 %
• Elevation - up to 2000 m

Display Digital

• Display - 7 segment
• Character height - 10 mm
• Number of digits - 33/4 - digit 3999 steps
• Overflow display - OL
• Polarity display - „–” sign is displayed when plus pole at „ ”
• Measurement rate - 3 measurement/s for V, I, W , Capacitance, Frequency and Duty cycle measurements